|
Hit your browser's Back Button to get back to the previous page.
|
|
|
|
Glit/Microtron Floor Pads are for all maintenance operations using floor machines in institutional, commercial and industrial locations. They can be used wet or dry with conventional and or high speed machines. The pads are a unique blend of 100% virgin polyester and 100% virgin nylon fibers impregnated with a tough, strong and elastic synthetic resin into which several types of abrasives have been incorporated, depending upon the required aggressiveness for the maintenance procedure. |
|
|
|
All Glit/Microtron Floor Maintenance Pads are manufactured according to stringent GSA specifications. |
|
|
|
|
“The materials used in the manufacture of Floor Maintenance Pads shall be either nylon, polyester, or a blend of nylon and polyester suitable for the intended use in accordance with good commercial practice.”
|
|
|
(Fed. Spec. 00-p0040D)
(GSA-FSS)
|
|
|
|
|
|
The web on the Glit/Microtron Pads is designed to be resilient so as to allow complete and thorough contact with the floor finish. The open web construction enables easier dirt pick up as well as quicker pad cleaning under running water. All pads in the Glit/Microtron line are usable on both sides with equal effectiveness. |
|
|
|
Glit/Microtron Pads have a center hole punch-out plug with thickness approximately 1” (Bolt hole for high speed machines also available.) Standard packaging is 5 pads per case with the exception of the very small sizes (7 3/4” - 10 pads per case) and the larger diameter sizes (25” thru 31” - 2 pads per case). |
|
|
|
|
All Glit/Microtron Floor Pads are 100% unconditionally guaranteed.
|
